SAMPLES PREPARATION & PRODUCTION MACHINES

REMET S.a.S. produce since 1970 machines and consumables for the preparation of metallographic, petrographic and histological samples. The tools of the current generation focus on the fast and economical production of samples without neglecting their quality.

Cutting discs, sanding tools and accessories, resins and materials for hot and cold embedding presses. These are some of the products that Remet produces and sells directly.

The real added value of the service offered is the decades-long experience and the professionalism gained that allows us to offer customized technological solutions based on the Customer's needs, for the solution of any problem concerning the control of incoming materials, production control and in general quality improvement.

NON DESTRUCTIVE CONTROLS

Examinations, tests and surveys conducted using methods that do not alter the material and do not require the destruction or removal of samples from the structure in question, aimed at finding and identifying defects in the structure itself.

Accelerated corrosion tests

SALT MIST SPRAY CHAMBER (ISO 9227 – ISO 7253 – ASTM B117 – ASTM B368)

NEUTRAL Salt mist (NSS) up to 96 hours
CUPRO – ACETICA Salt mist (CASS) up to 96 hours
Photographic documentation

Salt spray ACETICA (AASS) up to 96 hours
Periodic observation during the test
QUADRATION / ENGRAVING test (ISO 2409 / ISO 4628-8

HUMIDOSTATIC ROOM (ISO 6270 – ASTM D2247)

Humidostatic chamber test up to 96 hours
Photographic documentation

Periodic observation during the test

CYCLIC TESTS (CCT) (VDA 621 – 415 & DIN 50 014)

Alternating cycles of salt mist / controlled humidity / condensation / drying dedicated estimates on request according to the test specification applied
Other corrosion resistance tests (intergranular corrosion, Kesternich test) on request according to dedicated estimate

PROTECTION AGAINST CORROSION FOR CONCRETE STRUCTURES (UNI EN 15183)

Accelerated corrosion test according to UNI EN 15183 – point 6.3: up to 4 specimens (additional specimens according to estimate)
Implementation of test equipment: N ° 1 Nickel-plated steel mold for performing specimens (weight 6 kg), N ° 2 S235 steel bars 8 x 200 mm sandblasted, N ° 2 S235 steel bars 16 x 200 mm sandblasted, N ° 1 Steel plate 200 x 90 x 1 mm sandblasted

Removal of the concrete and of the protective and microscopic evaluation of the result of the test (on No. 1 plate and 4 bars)