Micro sections

MICROMET series

The cut-off machine MICROMET, ideal to realize thinning cuts and precision perfectly reproducible, with minimal loss of material and without inducing alterations (microfractures, etc.) In the specimens. The MICROMET available in three versions:
AUTOMATIC: all cutting operations are controlled from the front panel. The progress of the sample checked by a sensitive electro-hydraulic system with visualization of the shear stress.
SEMI: progress is made by adjustable weights with counterweight balancing.
MANUAL: monitoring the progress of the sample assigned to the operator by means of the control lever outside. The speed of the grinding wheel continuously adjustable (0 to 3000 revolutions / minute) and the transverse translation of the arm sample holder using a micrometer allow cutting and thinning of any type of material.
Great care was placed to eliminate the problems related to wear and corrosion: the camera body and all major components are made of stainless steel; The internal components are made of steel coated with chemical nickel or from corrosion and GHA. The MICROMET built in full compliance with the most stringent safety standards: pushbutton panel low voltage (24 V); screen of transparent polycarbonate which isolates the working area; safety microswitch that stops all functions lid open; emergency stop button.

 

MICROMET EVOLUTION

Micromet Evolution Series is a compact and cost effective machine that is ideal for precision cuts of delicate work pieces. Made of stainless steel.

[READ MORE]

 

MICROMET manual or semi-automatic

To perform sections of extreme precision in small parts or brittle specimens. Made of stainless steel.

[READ MORE]

 

MICROMET Automatic

Micro cut-off machine with fine control of the feed to run the sections extremely delicate samples in fragile and small. Made of stainless steel.

[READ MORE]

 

SECOTRON

Cut-off machine with three axes for high precision cuts through longitudinal wagon with effort control work and automatic optimization of the forward speed with programmable PLC. Stainless steel frame with plexiglass cover. Vertical adjustment of the grinding wheel and cross table for precise positioning of the sample. Particularly suitable for applications in the electronic field and research.

 

SECOTRON 200

Cut – off machine with 200 d. wheel, also avaible with basement with external pump and wheeled tank. Built in stainless steel.

[READ MORE]

 

SECOTRON 300

Cut – off machine with 300 d. wheel, also avaible with basement with external pump and wheeled tank, with pistol for clean. Built in stainless steel.

[READ MORE]

Mid sections

TR SERIES

The cut-off metallographic machines TR series, having been suitably designed to work in the laboratory, while responding to easy use, allow the sampling of pieces of any shape, from small to large, in full compliance rules metallographic, cuts and plans rigorously cold of all metals, easily solving both problems of metallurgical laboratory that those of the department thermal treatments. All saws TR are characterized by a large housing piece under the grinding wheel, the bar passage integral as well as a scrupulous compliance with safety regulations and protection against wear and corrosion, using electroless nickel, details more exposed. Built in stainless steel.

 

TR 60 – TR 70

Tabletop models with maximum cut-off diameter:

  • TR 60 with 60 mm that mounts wheels d. 200 mm;
  • TR 70 with 70 mm that mounts wheels d. 230 mm.
A request containing the base system pump-wheeled tank and accessory storage.

[READ MORE]

 

TR 80 – TR 100

Tabletop models with maximum cutting diameter:

  • TR 80 with 80 mm that mounts wheels d. 250 mm;
  • TR 100 with 100 mm that mounts wheels d. 300 mm.
A request containing the base system pump-wheeled tank and accessory storage.

[READ MORE]

 

TR EVOLUTION SERIES

The cut-off metallographic machines TR series, having been suitably designed to work in the laboratory, while responding to easy use, allow the sampling of pieces of any shape, from small to large, in full compliance rules metallographic, cuts and plans rigorously cold of all metals, easily solving both problems of metallurgical laboratory that those of the department thermal treatments. All saws TR are characterized by a large housing piece under the grinding wheel, the bar passage integral as well as a scrupulous compliance with safety regulations and protection against wear and corrosion, using electroless nickel, details more exposed. Built in stainless steel.

 

TR 80 E – TR 100 E

All TR machines are characterized by a large space under the wheel, by the passage integrate bar as a scrupulous compliance with safety regulations and protection against wear and corrosion, by means of electroless nickel on the most exposed details.

[READ MORE]

 

TR100 L & TR100 S

Cut – off machines with three-axle and basement, TR100 L horizontal development and TR100 S vertical development, both suitable for cutting large samples, special thanks to the longitudinal slide. Stainless steel frame, cover in plexiglas, stainless steel and cast iron components coated with chemical nickel, cast iron wheel motor and transmission through Poly-V belt. Refrigerant contained in a tank roundup housed in the basement.

 

TR100 L

With such a long cutting stroke, the TR 100 L, has the ability to accept pieces of considerable size. Available with manual or automatic wagon and optimization of the cutting speed. Made of stainless steel.

[READ MORE]

 

TR100 S

Standard Available (plunge cutting manual) or with automatism descent wheel for cuts in series, and with manual or automatic carriage and optimization of the cutting speed. Made of stainless steel.

[READ MORE]

Macro sections

SECOMET SERIES

Saws of considerable size and power for cutting large particular also of complex shape due to the possibility of movement in the three axes X, Y and Z; descent grinding wheel by means of the hydraulic cylinder, the longitudinal and transverse movement of the carriage with the possibility of automation. Built in stainless steel, SECOMET series enable cutting large pieces also high hardness in full compliance with the fundamental presuppositions of Metallography: precision cutting plan, with low roughness, rigorously cold and without deformation.

 

SECOMET 400 – 500 – 600

With 400 d. wheel.

With cutting section of 130 x 500 to 170 x 500 to 200 x 500 mm.

[READ MORE]